Extended Service Valve to Accommodate Press Fittings
High & Low Pressure Switches
Outdoor Temp Sensor Factory Installed
Factory Charged w/ R410A Refrigerant
Long Line Set Capability (refer to spec sheet for details)
Low Ambient Cooling Capable w/ Optional Kit
Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
Corner Posts for Added Cabinet Strength
Coated Hail Guard Coil Protection
Post Painted (black) Coil
Coated Cabinet Screws
Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
Two-stage heating operation
Two-speed induced draft combustion blower
Supports single- and two-stage cooling units
Dehumidification feature (A/C)
Fully insulated steel cabinet
Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
VCT Variable Speed Constant Torque Motor
Aluminized steel RPJ primary heat exchanger
Stainless steel secondary heat exchanger
Direct ignition with Silicon Nitride ignitor
Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
35” (889mm) high , for ease of installation
Four position - upflow/downflow/horizontal (left/right) installation
At least twelve different venting configurations
Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)